|
|
 |
|
Numeric |




 |
|
Alpha-Numeric |
 |
|
Other Products |

 |
|
Resources |


 |
|
|
| | Numeric Display, LED Timer
Elapse Timer
|
We have THREE lines of Electronic Timers. Below you will find
information on the standard LED Timers available from each of the
lines. Use this information and our Led Timer MODEL NUMBER
SELECTION CHART to find a model number and give us a call, or use our
QUOTE FORM and we'll do the work for you.
Go to
www.ledcounter.com
for our standard timers that are available from factory stock.
Feel free to give our sales team a call at
614-851-1100 or e-mail us at sales@ledgible.com for assistance in choosing the model and configuration that
is right for you!
|
American
LED-gible
Model # AF-2625-314
2.3" 4 Digit Timer
100 Foot Readability
|

|
|
This is the timer of choice if you require 4
DIGITS or less, and need to view it from 100 FEET or
less! It is available only in an industrial NEMA-12 enclosure
which is suitable for almost all industrial applications!
NOTE: Unit above shows 88:88. This is on lamp test.
The unit is in 59:59 format, either Minutes and Seconds, or Hours and
Minutes. The unit is jumper selectable between the two time
formats.
|
- Inputs--Time Up or Time Down (JUMPER
SELECTABLE), Preset
, and Reset
- Input Level--24VDC and 120VAC (JUMPER
SELECTABLE).
- Enclosure--Industrial enclosure
constructed from 16 cold
rolled steel, painted light gray. This display is suitable for the
harshest of industrial
environments. Water tight, wash down & NEMA-4X Stainless steel
versions are available on special order.
- Digit Height--Available in 2.3"
digit height
only.
- Configuration--Comes only in four digit
configuration
- Digit Characteristics--Uses seven segment
modules. Each segment of a number is a solid line.
- LED Color--Comes standard in
"high efficiency" RED.
GREEN
is available by special order.
- LED life: 100,000 hours
- Mounting--Tabs at the rear suitable for mounting
on a surface such as a wall, control cabinet, or support column.
- Warranty--Standard ALI one year limited warranty.
- Manual--in
PDF format
Note: This NEMA-12 type
display is dust resistant and is very suitable for almost all industrial
environments. We do not offer a NEMA-1 version of this display.
|
American
LED-gible
Trimline Series Timer
2.3", 4", or 8" Digits
100 - 200 Foot Readability |
 |
|
|
|
This is the timer series of choice if you require 2.3"
6 DIGITS, 4" 4/6 DIGITS, or
8" 4/6 DIGITS.
|
- Enclosure: Extruded Aluminum or 16
ga. steel (NEMA-1
/ NEMA-12)
- Display Window:1/8" or 1/4" Acrylic (NEMA-1 /
NEMA-12)
- Mounting: Wall Mount Brackets or Eye Bolts (NEMA-1 /
NEMA-12)
- Digit Height--Available in
2.3" or 4" digit height.
- # of LED digits: 2.3"-- 6 digit,
or 4" 4 digit or 6 digit.
- LED color: RED--GREEN
available in 2.3" models by special request
- LED life: 100,000 hours
- Input level: Optically isolated 24VDC (source or
sink) or 120VAC inputs (JUMPER SELECTABLE). 5VDC and 12VDC are available by special request.
- Type of inputs: Reset, Count Up, Count
Down
- Other options: Optional leading zero blanking.
(JUMPER SELECTABLE)
-
LED lamp test jumper to test all LED segments
- Maximum count rate: 10 Hz 50% Duty
Cycle
- Manual--in
PDF format
- Warranty: 1 year limited
warranty
Note: Our NEMA-1 Trimline
display is dust resistant and is very suitable for almost all industrial
environments however, the NEMA-12 version should be used in EXTREMELY
dirty environments. The usage of our NEMA-1 displays in a dirty
environment does NOT void our warranty.
|
|
Do you want to mount our LED Display Products in
your own enclosure or control cabinet?
See our information on purchasing components. Purchasing
Components
|
Request
Pricing & Information for an LED Timer
|